We are looking for a Senior Process Engineer to be responsible for design, development and documentation of manufacturing processes from a conceptual level through to full manufacturing implementation. This role involves advanced process technologies which enable innovative product designs which can be up-scaled to high volume and low-cost manufacture.

Silverbrook is looking for a Fault Isolation / Product Validation Engineer to assist in the development of new fault isolation and product validation tools, techniques and methods to determine and quantify product health via determination of failure root-cause.

We are looking for senior chemists to join teams working on a variety of chemistry-related projects. Applicants must have a higher degree in chemistry or in chemical engineering (Honours, Masters or Doctorate). Because of the variety of projects available, the specific field of chemistry or chemical engineering is not critical. What is critical is that the person is a creative problem solver and has a commitment to detail to ensure the successful execution of projects. Applicants must be enthusiastic laboratory workers, have excellent practical skills and have proven ability to work in multidisciplinary teams. Positions include research that is designed to understand fundamental chemical processes, development of research leads to proof-of-concept, and up-scaling to pilot manufacture.

Silverbrook Research is looking for dedicated software engineers who will be responsible for secure integrated circuit production systems and security appliances.

The Industrial Engineer’s main focus would be data gathering and analysis to create models and identify production bottlenecks on printhead production lines. The Industrial Engineer would also work with other departments to identify potential production throughput improvement projects. Other areas would be to specify equipment procurement and labour capacity requirements for global print head production to meet production targets. Lastly, to provide cost inputs to overall business model for current and future production.

The materials engineer involves working with R&D and production to assure high quality, cost-effective products and processes.

In this role you will undertake simulation and modelling tasks related to inkjet printheads, to inform decisions on physical and operational parameters of current and future printhead designs.

The Senior Electronics Technician participates in the delivery of new products through the complete research and development lifecycle, specifically electronic, electro-mechanical and optical devices. The position is also required to develop and maintain technical support facilities.

This is an opportunity to join the Process Development Group that is responsible for materials and process development for manufacturing in MEMJET and other technologies.

The requirements involve working with R&D and production to assure high quality, cost-effective products and processes.

You will identify and develop raw material suppliers necessary for the manufacture of Memjet technology. You will qualify supplier capability and ensure alignment with Memjet manufacturing strategy, including establishment and negotiation of the supply agreements. You will assess and evaluate supplier performance, including supplier established cost reduction programs and initiatives.

The Program Manager's role is mainly to deploy products developed by Silverbrook Research into high volume production at outsource manufacturing sites in Asia.

You will manage the procurement of equipment from manufacturing partners and ensure the timely delivery of capable solutions to subcontract assembly operations in Asia. You will ensure capital equipment project costs are kept to a minimum and actively engage with Silverbrook Research personnel, Manufacturing Partners and Equipment suppliers so that customer support is maximised and production solutions have increasing efficiency.

The Electrical Test Intergrator develops electrical test development methodologies so as to ensure that products can progress from design phase to high volume manufacture.

The other area of responsibilities include driving cross functional teams consisting of product development group, process development group, automation and equipment group and the reliability & failure analysis group to achieve the required product qualification.

The main focus is to advance process technologies thereby enabling creative and innovative product design solutions which can be up-scaled to high volume manufacturing. Resulting products must provide the cost, reliability, quality and performance required by our customers.

Australian based support for Taiwan based manufactured product.

• Responsible for Factory and Lab, test and process system development.
• Development of custom software systems for vision, automation and electrical test.
• Deployment of systems in accordance with company project deadlines.

Your role is to design and document production line concepts & schematics to the stage of line implementation, including industrial engineering and line metrics analysis. You will maintain overall equipment line BOM from the line design process and implementation schedules using data from External Manufacturing Services (EMS) and Automation Equipment Group (AEG) teams.

You will support the Equipment Procurement Team project activities from record keeping of documentation aligned with the defined business processes to ensuring the team produces the relevant /expected documentation for specific activity. You will also support the Equipment Procurement Team on shipping of materials and equipment to support the Memjet capacity ramp.

In this role, you are responsible for checking design documents for print heads intended for high-volume manufacture, to ensure the following items are consistent with needs by manufacturing processes, printer design, and automation equipment design.

The Workshop Technician provides prototyping services to the product design and other teams in the technology development department, using tool room equipment and rapid prototyping machines. The Technician builds prototypes, fixtures and equipment as specified by designers and engineers. The Technician will assists designers and engineers in specifying parts to suit the available machines and maintaining the workshop equipment.

We are seeking a number of dedicated and talented individuals to join a well established team of in-house attorneys within Silverbrook Research. These vacancies provide a fantastic opportunity to be part of an organisation that fosters creativity and breakthrough innovation as well as providing a flexible working environment willing to accommodate the individual’s personal needs.

The focus for the person in this role will be on software related technology, including image processing and printing software. Patent Attorneys with a few years experience in an emerging technology which does not necessarily match the experience and skills listed will be considered.

Development of electronics hardware for high volume manufacturing for the Printhead development and Printer development projects.

The Test Engineer is responsible for execution of tests determine the quality and characteristics of the product/s. The Test Engineer also provides guidance and overview of remote test teams performing detailed testing of product.

Responsible for establishment and execution of support processes and procedures for internal development systems, production systems and remotely managed customer systems.

The Process Operator manufactures completed ASIC (and related) parts for use in printhead assemblies made at North Ryde as well as for use within assemblies made by our manufacturing partners.

The main focus of this role is to ensure the smooth production uptime of the automated handler including the Tx tester + Supervisor to provide volume required to support our customers for specific and specialised electronic component within Silverbrook. This specialised part is a key component of Silverbrook production assemblies and requires a dedicated process engineering & technical support resource to handle it.

The main focus of this role is to ensure the incoming inspection of completed QA Chip lots being shipped in canisters from our approved assembly sub-contractors conforms to the required standard.

Assemble prototype parts. Perform test and evaluations.

Assemble prototype parts. Perform test and evaluations.

Assemble prototype parts. Perform test and evaluations.

Role & Responsibilities
Experimental Characterization

• Develop suitable experimental protocols using particle counting and sizing instruments within a cleanroom environment
• Identify particles by type and origin using microscopy or material analysis
• Quantify the particle mass balance as the ink moves through a complex flow path
• Identify sources and sinks of particulates in the system

You will participate in the commissioning and installation of process equipment for existing and future products that can be up-scaled to high volume manufacturing.

We are looking for a Design Engineer with mechanical aptitude and experience to assist in research and development of printer maintenance systems including designing mechanical prototypes, test fixtures and equipments executing test plans and documenting results in lab environment.

To provide a service that will provide gear plate assemblies for prototype equipment designed and built by Silverbrook Research.

You will be responsible for the MJE-PDG process integration builds, for the manufacture of print head products from Process Discovery, to Development and to Deployment into manufacturing. You will manage the Process Development Build Integration Group which includes a Yield Integrator and Integration Engineers. You will also ensure that the developing processes are converging to a mature status through build cycles according to the companies’ high level plan (road map) so that resulting products must provide the cost, reliability, quality and performance required by our customers.

Specification, design & implementation of a software package for printhead IC testing & characterisation, using existing test hardware.

The Industrial Engineer’s main focus would be data gathering and analysis to create models and identify production bottlenecks on printhead production lines. The Industrial Engineer would also work with other departments to identify potential production throughput improvement projects. Other areas would be to specify equipment procurement and labour capacity requirements for global print head production to meet production targets. Lastly, to provide cost inputs to overall business model for current and future production.

This main aim of this role is to help manage and assess the MJE-PDG process integration builds health, for the manufacture of print head products from technology development stage through to manufacturing implementation; using statistics and yield analysis tools. You will ensure that the manufacturing processes are converging to a mature status through build cycles according to the company's high level plan (Road map). Resulting process/es must provide the stability, capability (in yield) and manufacturability.

Test Engineering within the Printhead Verification team.

Responsible for providing technical services required for a team of scientists and engineers.

The Process Development Engineer, Automatic Optical Inspection is responsible for the design, development, implementation and transfer of the process of identifying Known Good Die (KGD) utilizing Automatic Optical Inspection (AOI).

To collect, review, clarify and document product requirements.

In this role you will provide technical services to test engineers, specifically to maintain a laboratory and associated equipment, and to execute tests.

Understanding product requirements and the reason for them so that meaningful development and system tests can be developed.

The Chemical Scientist’s main role is Research and development of inks for printing technologies:

• Research and development of inks for Memjet printers;
• Research and development of security inks;
• Research and development of new colorants for printing applications;
• Research and development of inks for offset printing.

This is a great opportunity for an enthusiastic & detail-oriented individual to work in a team in a jovial, positive Lab Environment in the heart of Balmain. As Laboratory Technician you will test devices (typically chips) for performance reliability, analyse pattern recognition & gather & analyse data using Excel.

We are looking for a Process Technician who will be responsible for providing engineering and technical services required for a team of process development engineers. Initially the role is to set up and then it is for ongoing maintenance of lab equipment and support services.

We are looking for a Stores Assistant to look after the Manufacturing Stores area and all related processes such as stock taking, stock management and all other procedures normally related with a stores system.

This role undertakes the packing, shipping of parts as required. You would need to produce MS Excel based stock lists, to allow simple monitoring of stock levels across the manufacturing group. You will also assist with, where appropriate, incoming goods inspections of parts received for manufacturing.

The Failure Analysis Manager will lead a team performing business conscious and value added failure analysis to determine root-cause of failures and support determination and implementation of solutions to reduce or eliminate failures. The role is to develop new Failure Analysis and Fault Isolation tools, techniques and methods to determine root-cause of failures as well as to help drive the expansion of the team to cope with the additional demands from HVM manufacturing partner returns.